اتصال ابزار اندازه‌گیری¶
With Odoo's IoT box, it is possible to connect measurement tools to the Odoo database for use in the Quality app on a quality control point/quality check, or for use in a work center during the manufacturing process.
لیست دستگاه‌های پشتیبانی شده در دستگاه‌های پشتیبانی شده قابل دسترس است.
Connect with universal serial bus (USB)¶
To add a device connected by USB, plug the USB cable into the IoT box, and the device appears in the Odoo database.
اتصال با بلوتوث¶
در دستگاه خود بلوتوث را فعال کنید (برای اطلاعات بیشتر راهنمای دستگاه را مطالعه کنید). باکس IoT به صورت خودکار نسبت به اتصال اقدام خواهد کرد.
اتصال ابزار اندازه‌گیری به پایانه کنترل کیفی در فرآیند تولید¶
In the Quality app, a device can be set up on a quality control point. To do that, navigate to , and open the desired control point to which the measurement tool should be linked.
From here, edit the control point, by selecting the Type field, and clicking Measure from the drop-down menu. Doing so reveals a field called Device, where the attached device can be selected.
Additionally, Norm and Tolerance can be configured. Save the changes, if required.
با این کار ابزار اندازه‌گیری به نقطه کنترل انتخابی متصل می‌شود. مقدار آن، که معمولاً باید به شکل دستی تغییر یابد، به هنگام استفاده از دستگاه به شکل خودکار به‌روز می‌شود.
نکته
Quality control points can also be accessed by navigating to , then select the device. There is a Quality Control Points tab, where they can be added with the device.
توجه
On a quality check detail form, the Type of check can also be specified to Measure. Access a new quality check detail page, by navigating to .
همچنین ببینید
اتصال ابزار اندازه‌گیری به پایانه کنترل کیفی در برنامه تولید¶
To link a measurement tool to an action, it first needs to be configured on a work center. To do that, navigate to . Then, select the desired work center in which the measurement tool will be used.
On the work center page, add the device in the IoT Triggers tab, under the Device column, by selecting Add a Line. Then, the measurement tool can be linked to the Action drop-down menu option labeled Take Measure. A key can be added to trigger the action.
مهم
It should be noted that the first listed trigger is chosen first. The order matters, and these triggers can be dragged into any order.
توجه
On the Work Order screen, a status graphic indicates whether the database is correctly connected to the measurement tool.
همچنین ببینید